Publicité
P R E S R V ™
Operating Your Appliance
W I N E C O O L E R
D U A L Z O N E
Internal Light
This refrigerator is equipped with side internal lights that can be set to Cloud White, Deep Blue or
Amber. Because the unit comes with a glass door, the inside will be seen whether the door is open or
closed.
You can choose to display each color of light in two different modes: Display Mode and Automatic
Mode by pressing and holding the Light Brightness button for 3 seconds. Display Mode will be
signaled by showing "LN" on the display, and Automatic Mode will show "LF" on the display.
Automatic Mode: LF
The internal lights will illuminate each time the door is opened and fade off after the door is closed.
This is the default lighting mode. This feature is triggered by a sensor located on the front vent that
recognizes when the door is open or closed.
Display Mode: LN
The internal lights will remain illuminated whether the door is open or closed. The brightness will be
based on your brightness setting when the door is closed, but will change to the highest brightness
setting upon opening the door. This is a user-enabled lighting mode and will use more energy.
Display Brightness
The brightness of the controls can be adjusted by holding the ºC/ºF button and tapping the Light
Brightness button. The brightness will increase when cycling from b1 to b2, b3, and b4, and it will
decrease from b4 to b3, b2, and b1.
Press and hold the Interior Light button for 3 seconds to switch between "CF" mode and "CN" mode.
The display will show "CF" meaning the controls will remain on when the door is open, but it will fade
off in 15 seconds when the door closes. The display will show "CN" meaning the controls will remain
on regardless of the door being open or closed.
Door Open Alarm
After 3 minutes of the door being open an alarm will sound and the display will flash with 00.
18
PRPW24C02CG Use, Care, and Installation Guide
Publicité
