Publicité
R
29. Ask for assistance to lift the doors upright and attach one Handle (R) to the front side of each Door (M
and N) with two Handle Bolts (14) per handle.
B
M
30. Pick up the Left Door (M) and align the hinge bases to the pilot holes on the Left Side Panel (B).
31. Insert two 15 mm Screws (13) through the CENTER of oval holes and move the doors up or down to the
desired position, then fasten the Hinge Bases (S) into place.
32. Proceed to insert two 15 mm Screws (13) through the round holes and fasten into place.
33. Repeat the same procedures to attach the Right Door (N) to the Right Side Panel (C).
34. Open and close the doors to make sure they are aligned and shut correctly. If necessary, adjust the screws
for a good fit. (Refer to the hinge sticker on door for adjustment).
Assembly Instructions
M
14
S
C
N
17
N
14
13
DO NOT fully tighten the
R
Depth
Adjustment
Vertical
Adjustment
Horizontal
Adjustment
screws.
Publicité
