Transport Of The Appliance; Installation Preparation; Special Installation - Bosch B18IF800SP Instructions D'installation

3.

Transport of the appliance

WARNING:
Be careful, otherwise people who are helping
may be injured or the appliance may be
damaged!
The appliance is very heavy.
The appliance is 83 / " (2126 mm) tall. If the appliance
1
8
cannot be transported in an upright position, the
appliance can be transported horizontally.
Note:
Do not raise up the appliance via the side panels. Risk
of damage to the appliance!
When raising up the appliance, observe the required
minimum height at the installation location according to
the following table:
Raise up via appliance
rear
Minimum height
86"/2185 mm
Note:
Always use the appliance dolly from the rear side of the
appliance. Never push it in from the front under the
appliance. Risk of damage to the appliance!
1. Transport the appliance to a suitable installation
location with suitable means of transportation
(trolley, lifting truck or hand).
2. Secure the appliance during transportation to
prevent it from tipping.
Do not raise up from
appliance side
Do not raise up the
appliance via the side
panels!
4.

Installation preparation

Unpack installation materials and accessories.
To simplify installation, the packages are identified with
labels A, B and C corresponding with the manual
chapters.
5.

Special installation

Special installation steps are described after chapter C.
The following symbol indicates that additional steps
need to be taken before proceeding to the next
chapter.
The appliance may tip over while it
is being unpacked or if the doors
are opened.
Sealing mat, see "Removing/
changing over the sealing mat"
Side-by-Side installation,
see "Side-by-Side installation".
Connecting the water, see
"Preparing to connect the water"
and "Connecting the water to the
appliance".
Door limitation pin, see "Adjusting
the door opening angle".
en-us
11