Publicité
NOTE: At no time should the logs impinge or go across the fl ames.
A
1.
Remove stud A. Then place log #3 fl at in front
of the media barrier on studs B and C.
2
3.
Place log #5 on the front left side of the media
tray.
2
5.
Place log #8 on the right side of the media tray
with the smaller end on log #7.
Wolf Steel Ltd., 24 Napoleon Rd., Barrie, ON L4M 0G8 Canada
3
B
C
5
3
5
8
3
7
2
2.
Place log #2 on the left side of the media tray.
note:
For ease of installation, place some of the lava rock/
charcoal (supplied) around the rear logs, covering the
media tray (not illustrated). Ensure the lava rock does
not cover the burner and air intake areas.
2
4.
Place log #7 on the front right side of the media
tray with the smaller end of the log in front of
the pilot light.
note:
Place any remaining lava rock/charcoal (supplied)
around the logs, covering the media tray (not illustrat-
ed). Ensure the lava rock does not cover the burner
and air intake areas.
• 1(866)820-8686
3
5
3
7
W415-4060 / 01.28.22
• www.napoleon.com
Publicité
