Publicité
*For a copy of the manual please visit www.fellowes.com
WARNING: IMPORTANT SAFETY INSTRUCTIONS — Read Before Using!
Please read and save these instructions. Read carefully before attempting to assemble, install, operate, or maintain this product.
Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury
and/or property damage. Retain instructions for future use. This appliance is designed to be used in commercial areas.
IMPORTANT CAUTIONS AND INSTRUCTIONS FOR USING PRODUCT:
WARNING:
Follow the instructions in this manual to reduce the risk of electric shock, short circuit, and/or fire:
• Use this unit only in the manner intended by the
manufacturer. If you have questions, contact the
manufacturer.
• This product is not serviceable. DO NOT attempt to open,
repair, or modify this product. Doing so could present
the risk of electrical shock or other hazard.
• When drilling into mounting surfaces, do not damage
electrical wiring or other hidden utilities.
• Use only the electrical power (voltage and frequency)
specified for the product being installed.
• Do not use detergents to clean the screen. To clean the
screen only use a clean dry microfiber cloth.
• Do not install this product near heat-generating
equipment.
• Do not use the unit where it is humid or where the unit
may get wet.
• This product is for indoor use only.
PRODUCT SPECIFICATIONS (HARDWIRE)
(HARDWIRE)
Size
5.6 x 6.7 x 2.4 in
Weight
1.1 lbs
AC Input
100-240V 50/60Hz 0.70A
DC Output
12V 3.00A
Power
36W
PRODUCT SPECIFICATIONS
(PLUG)(PLUG)
Size
5.6 x 6.7 x 3.1 in
Weight
0.7 lbs
AC Input
100-240V 50/60Hz 1.30A
DC Output
12V 3.00A
Power
36W
WIRELESS CONNECTION
For more information about getting connected, please visit arrayviewpoint.fellowes.com.
If you have any questions or need help along the way, please contact us at 1-800-477-7940.
MAINTENANCE AND CLEANING
2
If needed, use a dust cloth to gently remove dust and debris that may have built up.
ADDITIONAL HARDWIRE WARNINGS
• Installation work and electrical wiring must be done by
qualified person(s). All electrical installation work must
be conducted and carried out in accordance with all
federal, state, and local codes and regulations.
• The product must be grounded.
• Do not open, repair, or modify the power supply
housing. Doing so could present the risk of electrical
shock or other hazard.
ADDITIONAL PLUG WARNINGS
• Do not use if power cord is damaged.
• Do not connect this product to any electrical outlet that
is damaged.
• Do not bend the power cord excessively or place heavy
objects on it.
• Do not alter the length of the power cord.
• Do not touch the power cord with wet hands. It may
result in electrical shock.
• Make sure that the power cord cannot be pulled out or
damaged during operation.
• Only use the power cord that was supplied with the
product. Use of unauthorized power cords could result in
electrical shock or product damage.
141 x 171 x 60 mm
0.5 kg
141 x 171 x 79 mm
0.3 kg
ENGLISH
DISPLAY FEATURES
11
RESET
1
Air Index (%)
- >80% = Blue
- >50% to 80% = Amber
- 50% or less = Red
2
PM 2.5
(μg/m3)
- 0 to <12 = Blue
- 12 to <35 = Amber
- 35+ = Red
TVOC
3
(ppb)
- 0 to <241 = Blue
- 241 to <316 = Amber
- 316+ = Red
1
2
3
4
8
9
10
CO2
4
(ppm)
Temperature
8
- 0 to <964 = Blue
- Change units on Viewpoint Dashboard
- 964 to <1540 = Amber
9
Relative Humidity
- 1540+ = Red
Barometric Pressure
Settings Screen
10
5
- Building, Area, and Account settings.
11
Main Screen
Area Fan Settings
6
- Press to go to the Main Screen
- Displays the fan setting that most of the
units in the Area are set to.
Metrics Screen
12
7
Quiet Timer
- Press the information button or swipe
to the side to go to the Metrics Screen
- Press to set all units in Area to
Quite Auto mode for 60 min
- Press again to cancel
12
5
6
7
(°F/°C)
(%)
(mmHg)
3
Publicité
