Publicité
STEP 20 - Wooden & Metal Studs
As shown in the view to the right, fasten the unit to the wall studs with screw (3) and washer
(8). The view shows the Upper Back Panel (G) but do the same for Bottom Stringer (M). You
must screw at least 3 screws into 3 different wall studs, in the horizontal direction, but 4 is
better on part G & part M.
dorelhome.com
3
(x8)
First, make sure that your unit is still level in all directions.
G
M
A ladder will be required.
Do not lean against the top
of the unit, it may cause
sagging
31
8
(x8)
3
8
G
Publicité
