Publicité
P
Read through each step carefully and follow the proper order.
Separate and count all your parts and hardware before attempting assembly.
P
Parts are labeled on the surface or edge of the part
P
Open your item in an area you plan to keep it. Give yourself enough room for the installation and
assembly process.
P
Make sure to always face the point on the top of the Cam Lock towards the outer edge.
P
Never push, pull or drag your furniture. Do not use harsh chemicals or abrasive cleaners on this item.
P
Have the following tools: #2 Phillips Head Screwdriver, Hammer, Level, Stud Finder, Pencil, Step
Ladder, Rubber Mallet and a Drill with 1/8" and 1/4" bits
P
Caution: If using a power drill or power screwdriver for screwing, please be aware to slow down and
stop when screw is tight. Reduce torque setting to a lower level so the drill will skip when the screw is
tight. Failure to do so may result in stripping the screw.
Cam Lock Fastening System
This Cam Lock Fastening System will be used throughout the installation and assembly process.
1
3
dorelhome.com
Before You Start
2
4
3
Publicité
