Publicité
Adult assembly is required.
Take care of small parts. To prevent a choking hazard, keep small children away when
assembling.
Before assembling, count all small parts carefully, ensuring everything is present.
Dispose of the plastic bag properly. Do not let children play with the plastic bag.
1. Front wheel assembly
Separate the front wheels ❺ and rear wheels ❻. Front wheels do not have the driving
plastic parts, whilst the rear wheels do have the driving plastic parts. Turn over the car
body, remove the nuts from the front axle using the wrench ❽, then remove the
washers. Keep the washers and nuts for future use.
Insert the two front wheels ❺ and the washers into the front axle, then fasten the nuts
with the wrench ❽. Whilst applying pressure, lock the wheel covers ❼ into the
grooves on the front wheels ❺.
Washer
Nut
2. Rear wheel assembly
a. There is one washer and one nut on each side of the rear axle. Remove the nuts
from the rear axle using the wrench ❽, then remove the washers. Keep the washers
and nuts for future use. Check if the axle is positioned at the centre of the car, then
ensure the lengths extending out on both sides of the axle are equal.
b. Separate the front wheels ❺ and rear wheels ❻. Front wheels do not have the
driving plastic parts, whilst the rear wheels do have the driving plastic parts.
c. Insert the two rear wheels ❻ and washers into the rear axle, then fasten the nuts on
both sides simultaneously using the wrench ❽. Whilst applying pressure, lock the
wheel covers ❼ into the grooves on the rear wheels ❻.
Assembly instructions
Front wheels don't have driving plastic parts
4
Washer
Nut
Publicité
