Publicité
6.
Insert the shank into the router collet at least all the way to the marked line indicated on the
shank. This ensures at least 3⁄4 of the shank length is held in collet. Ensure clamping surfaces
are clean.
7.
Check all fixing and fastening nuts, bolts and screws on power tool, attachment and cutting tools
are correctly assembled, tight and to correct torque setting before use.
8.
Ensure all visors, guards and dust extraction is fitted.
9.
The direction of routing must always be opposite to the cutter's direction of rotation.
10. Do not switch power tool on with the cutter touching the workpiece.
11. Trial cuts should be made in waste material before starting any project.
12. Repair of tools is only allowed according to tool manufacturers instructions.
13. Do not take deep cuts in one pass, take shallow passes to reduce the side load applied to the
cutter.
14. User must be competent in using woodworking equipment before using our products. Dress
properly, no loose clothing/jewellery, wear protective hair covering for long hair.
15. Consider working environment before using tools. Ensure working position is comfortable and
component is clamped securely. Keep proper footing and balance at all times. Check work area
for obstructions. Keep control of power tool at all times.
16. Please keep children and visitors away from tools and work area.
17. All tools have a residual risk so must therefore be handled with caution.
18. Only use Trend original spare parts and accessories.
If you require further safety advice, technical information, or spare parts, please call Trend Technical
Support or visit www.trend-uk.com
ITEMS REQUIRED
•
Mitre saw
•
Hand tools
ITEMS ENCLOSED & DESCRIPTION OF PARTS - Fig.1
Body
A
B
Raising mechanism
C
Height adjuster knob
D
Roller
Roller springs
E
F
Screw holes for bench fixing
G
Soft foot pads
OPERATION
•
Ensure surface is flat before using.
•
Ensure the roller and raising mechanism are free from obstruction and moving easily.
•
Place the roller at a suitable distance from the mitre saw, depending on the length of the
workpiece to be cut - Fig. 2.
•
Measure the height of the workpiece from the bench/surface the mitre saw is on - Fig. 3.
•
Raise the roller to the required height using the height adjuster knob, ensuring it is level with the
underside of the workpiece to be cut - Fig. 4.
EN - R/STAND/A
-5-
Publicité
