Publicité
PARTS DESCRIPTION
1. Hair/beard clipper blades
2. Fine-adjustment slide control
3. On/Off switch
4. Power connect port
5. 1.5mm comb attachment
6. 3mm comb attachment
7. 4.5mm comb attachment
8. 6mm comb attachment
9. 10mm comb attachment
10. 13mm comb attachment
11. Protection cap
12. Cleaning brush
13. USB cord
14. Led indicator light
TECHNICAL SPECIFICATION
Powerful motor: DC 3.7V
Battery charging time: 2 hours
Running time: 120 minutes
Battery: Li-ion battery 18650-1200 mAh, 3.7VDC
USB Cable: Visible length 1m, 24AWG
Protection: IPX7 waterproof
BEFORE THE FIRST USE
• Take the appliance and accessories out the box. Remove the stickers, protective foil or plastic
from the device.
Charging instructions:
CAUTION: This product does not contain an adapter. It is recommended to use with an
adapter that complies with CE certification and provides SELV output.
Tips: You can charge a laptop, computer, power bank, adapter or vehicle with adapters
using the USB channel.
• When using the adapter, put the transformer/ adapter cable into the appliance.
• When using the USB cable, attach the USB plug into the power source and the transformer
cable into the appliance.
• After a few seconds, the charging light goes on to indicate that the appliance is charging.
Charge the appliance for at least 2 hours before you use it for the first time and after a long
period of disuse. When the appliance is fully charged, it has a cordless operating time of up
to 120 minutes.
1.Insert the USB cable into the tail of clipper, connect to the power to start charging.
2.When charging: battery icon in green will appear steady.
3.When finish charging: battery icon in green starts to blink.
Warning: Do not charge the appliance for more than 24 hours.
AHC-5050 Instruction Manual
1
2
3
3
14
5
Publicité
