Publicité
The compressor has a working light. When you switch on the appliance by pressing the main switch,
the lamp lights up. When you switch off the appliance by pressing the main switch, the light goes out.
If the lamp starts to flicker during operation, the appliance has overheated. Switch off the appliance,
remove the battery and allow both to cool down.
Caution:
Please do not look directly into the light, your eyes may be damaged.
Stow the adapter
The compressor is supplied with various adapters. You can store these in the adapter holder of the tool (see
following image). Please ensure that you insert the needle for inflating balls into the Presta valve adapter
before storing the two adapters.
1: Needle for inflating balls
Original manual FX-E1CI20_rev02
2: Presta Ventil Adapter
26
3: Storage space for storing the adapters
Publicité
