Publicité
Operate the device only in the technical condition prescribed and delivered by the manufacturer.
Unauthorized modifications to the device exclude the manufacturer's liability for any resulting damage.
Only use the device in daylight or under good artificial lighting.
Only use the device in dry weather conditions. Keep it away from rain or moisture. The penetration of water
into the device increases the risk of electric shock.
Switch off the device and remove the battery in the following conditions:
if the device is left unattended;
before checking, cleaning or other work on the device;
if the device starts to vibrate excessively.
Before Use
Familiarize yourself with the device and its functions and controls before starting work.
Check the device for signs of wear or damage before starting up and after a collision.
Do not use a device whose switch is defective and can no longer be switched on or off.
Check that all nuts, bolts, and screws are tight to ensure that the device is operated safely.
Never use a device with damaged or missing parts. Have them repaired or replaced if necessary by a
qualified specialist or workshop.
Always wear appropriate personal protective equipment when working with or on the device (safety
goggles, ear protection, non-slip work gloves, etc.) The wearing of personal protective equipment reduces
the risk of injury.
During Operation
Do not switch on the device if persons (especially children) or animals are in the immediate vicinity. Make
sure that children do not play with the device.
Make sure that you have a firm stand and work calmly and carefully. Use the appropriate saw blades
according to the working material (wood, metal, brick, plaster, etc.). An incorrect selection can lead to
slipping and injury. Wear hearing protection when using the device. Exposure to noise can lead to hearing
loss. Hold the power tool by the insulated grip surfaces.
When carrying out your work, you may come into contact with concealed cables, and this may result in
electric shock if you do not hold the saw properly.
After use
Switch off the device and remove the battery from the saw. Then place the unit in a safe place.
Do not store the device within reach of children. Make sure that the ventilation slots in the device are clean.
Please do not clean the dirt with water. The electrical device may be damaged.
Original manual FX-E1CI20_rev02
21
Publicité
