Publicité
10
For an instructional video on How to Install
Your Showerpik
Water Flosser, please visit
®
www.waterpik.com/showerpik-install
or simply scan the QR code.
Re-Installing a Waterpik
Showerhead
1. Place the large nut over the
Showerpik
bracket threads with
®
the large nut threaded end facing
you (narrow end toward bracket) (1)
2. Thread pivot ball onto Showerpik
bracket threads and hand tighten
clockwise to a snug fit. (2A) Use an
adjustable wrench or pliers to tighten an additional ¼–½ turn. (2B)
IMPORTANT: Do not over tighten.
2A
Tighten
Hidden Pivot Ball
®
1
Large
Nut
®
2B
Tighten
NOTE: Some Waterpik
showerheads have large nuts that do not leave
®
enough room on the Showerpik
®
bracket threads for the pivot ball to be
attached. If this is the case, contact Water Pik, Inc. customer service at
1-888-226-3042 with your shower model number to obtain an extension
to the Showerpik
bracket threads. (2C)
®
2C
Showerhead
Showerpik
Bracket
®
Threads
Showerpik
Thread
®
Extension
Oversized Large Nut
Pivot Ball
Publicité
