Publicité
1. Floor brush
2. Telescopic tube
3. Air slide
4. Suction hose
5. Suction hose connection
6. Carrying handle
Assembly: Always unplug from the wall socket before fitting or removing accessories. 1.
To attach the hose to the hoover, place the hose in the air inlet duct and push until you hear a «click»
to ensure that it is securely attached.
Attach the bent tube/hose extension.
Attach the floor brush to the tube. Push the tube towards the inside of the floor brush. Adjust the tube
to the desired length.
Before inserting the plug into the mains socket, please check that the voltage and frequency are as
specified on the rating label.
Use the new connection sets supplied with the appliance, do not reuse if they are used.
Do not use this appliance without a filter.
Before each use, check the cord for signs of damage or ageing: risk of fire or electric shock.
INSTALLATION INSTRUCTIONS
INSTRUCTIONS FOR USE
7. On/off button
8. Unlock button
9. Cord rewind button
10. Power setting button
11. Flat nozzle
12. Furniture T-nozzle
8
Publicité
