23870
Diesel Refuelling Pump
Features
•
Faster refuelling - 35 litres/minute (9.5 U.S.GPM).
•
High head capability - 6 metres (19 feet).
•
Self priming up to 2.8 metres (9 feet).
•
Vibration tested.
•
IP55 protected motor.
•
Full range of installation accessories.
•
Customised kits for OEM customers.
Typical Applications
•
Designed for refuelling small sizes diesel powered vehicles
[typical tank sizes up to 200 litres (50 U.S. gallons)] from
drums.
•
Suitable for mounting to the following equipment: Excava-
tors, Cranes, Road rollers (compactors), Pavers, Agricultural
machines, Generators, Helicopters.
•
Suitable for diesel fuel, Kerosene, Paraffin, Hydraulic oils, Oils
up to 150 centi Stokes (750 Saybolt Universal) viscosity.
Do not pump gasoline,solvents, thinners or other flammable liquids.To do so can cause an explosion resulting in
Model Range
Gamme de modèles / Modellpalette / Gamma di modelli / Modelreeks / Modellutbud / Gama de modelos
Model number
23870-2200
23870-2300
23870-1200
23870-1300
23870-1600
Accessories
23533-1000
23533-1100B
X5020-003
23735-0010B
23736-0000B
23732-0000
23531-0001G
WARNING: Explosion hazard.
Description
1/2" BSP parallel internal ports, 12v DC switch, fuse
1/2" BSP parallel internal ports, 24v DC switch, fuse
19mm (3/4") O/D hose ports, 12v DC, swtich, fuse
19mm (3/4") O/D hose ports, 24v DC, swtich, fuse
19mm (3/4") O/D hose ports, 24v DC, swtich, fuse, check valve, suction strainer
Straight Hose Adaptors
Straight Hose Adaptors (Kit of 2 including sealing washers)
90° Hose Adaptors
Check Valve Kit
Foot Valve Kit
Suction Strainer 300 Micron
Hose - 19mm (3/4") bore - per metre
Specifications
Temperature Range:
Pump Body:
Rotor:
Vanes:
Shaft:
Seal:
Ports:
Motor:
Duty:
injury or death.
2
-30°C to +40°C (-22°F to +104°F)
Aluminium
Vectra
PTFE Filled Ryton
Steel
Nitrile Lip Seal
Vertical 1/2" BSP or
19mm hose adaptors (3/4")
12V or 24V DC permanent magnet,
corrosion resistant IP55 protected
*Continuously rated up to 3 metres
(10 ft.), total head of diesel fuel at
40°C (104°F)