Publicité
ment parts will not only lead to an invalida-
tion of the warranty, they may also endan-
ger you and your environment.
Device-specific safety instructions
• When the product has been turned off,
always secure it to prevent accidental
switching on.
• Do not use devices if the On-Off switch is
not in proper working order.
• Keep the handles dry and free from
grease.
• Keep the work area clean and tidy when
working with the product.
• Make sure there is adequate lighting
when working with the product.
• Always hold the device firmly with both
hands.
• Keep supply lines and limbs away from
the tool.
• The device is not suitable for operation in
potentially explosive atmospheres.
Sparks may occur during work, which may
ignite flammable liquids, gases, chippings
or dusts.
• Vapours or dusts containing components
that may be carcinogenic, cell-damaging
or mutagenic may arise during activities
such as drilling, sawing, grinding and
spraying. These include, among others:
Lead in paints and varnishes containing
lead; crystalline siliceous earth in tiles,
cement and other masonry work; arsenic
and chromate in chemically treated wood.
• To reduce health risks, such activities
should only be carried out in well-venti-
lated rooms with suitable protective
equipment. Use dust extraction and filter
devices whenever possible or as the situ-
ation requires.
• Always wear suitable protective clothing.
The wearing of impact-resistant eye pro-
tection, hearing protection, dust masks,
gloves, strong footwear and tightly-fitting
clothing reduces the risk of injury.
• Please observe that fragments may be
chipped off or the workpiece destroyed
when working with the device.
• The tools are subjected to intensive stress
due to the striking movement and can
unexpectedly break as a result of fatigue.
Always adopt a working position that you
can maintain in the event of a tool break-
age.
• Make sure you are standing firmly and
that you have a natural posture when
working. This enables you to react better
to usual or unexpected reactions of the
device caused by backlash, blockage,
jamming, tool breakage or workpiece
breakthrough.
• Repeated movements of the device and
vibration loads can lead to vibration dam-
age in the hands and arms. If you should
notice pain, tingling, numbnes or whiten-
ing of your fingers, you may not continue
to work. Consult a physician and use suit-
able holding equipment for prophylactic
reasons.
• Only use fault-free accessories suitable
and approved for the device. Incorrectly
fastened, damaged or worn tools can
cause intensive vibrations, by means of
which the device may become uncontrol-
lable. Loosening or breaking tools or
splinters thereof can cause injuries.
• The On-Off switch must be released upon
breakdown of the power supply, to pre-
vent sudden startup upon reactivation of
the power supply.
• Only use lubricants recommended by the
manufacturer.
• Pay attention to cables as well as gas and
water pipes when working on walls, ceil-
ings and floors.
• Symbols appearing on your product may
not be removed or covered. Signs on the
product that are no longer legible must be
replaced immediately.
Read and observe the instructions
for use before using the product for
the first time.
Wear hearing protection.
Wear protective goggles.
Wear tightly fitting clothing.
Your product at a glance
Note: The actual appearance of your
device may differ from the illustra-
tions.
► P. 3, fig. 1
1. Retaining spring
2. Air outlet
3. Tool mount
4. On-Off switch
GB
25
Publicité
