Publicité
Do not burn the battery pack!
Do not expose the battery pack to sunlight
or increased temperatures!
MAX xx °C
MAX xx °C
Personal protective clothing
Wear safety goggles
Wear ear defenders
Wear a dust protection mask
Wear protective gloves
Wear safety shoes
Wear close-fitting work clothes
Your device at a glance
Note: The actual appearance of your prod-
uct may differ from the illustrations.
► P. 3, fig. 1
1. On/off switch
2. Safety lock
3. Operating handle
4. Lock for front handle
5. Lock for cutting head inclination
6. Guide roller
7. Protective hood
8. Filament spool
9. Spacer
10. Cutting head
11. Lock for cutting head rotation
12. Lock for length setting
13. Front handle
► P. 3, fig. 2
14. Battery pack (not included in the scope of deliv-
ery)
15. Display for remaining capacity
16. Push button for capacity display
17. Locking button
18. Control lights
19. Battery charger (not included in the scope of
delivery)
Scope of delivery
• Operating manual
• Lawn trimmer
• Spacer
• Protective hood
Assembly
CAUTION! Risk of injury! On the under-
side of the protective hood there is a sharp
blade designed to cut the thread. Remove
the transportation protection mechanism
after mounting.
► P. 4, fig. 3
– Push the protective housing (7) onto the cutting
head from below and lock by a 90° turn.
– Secure the protective housing with a screw (20).
– Remove the transportation protection mechanism
from the cutting blade (21).
► P. 4, fig. 4
– Press in and hold the locking buttons (4).
– Attach the front handle (13) to the product as illus-
trated.
– Release the locking buttons (4) again.
Using for the first time
Charging the battery pack
Note: Rechargeable battery and charger
are not part of the scope of delivery and are
available optionally from your dealer
(► Accessories – p. 32).
WARNING! Risk of injury! Comply with all
safety instructions when handling recharge-
able devices.
NOTICE! Risk of damage to the unit! Do
not allow the battery pack to deep discharge.
Note: The Li-Ion battery pack can be
charged at any time without affecting the life-
time of the unit. Interrupting the charging
process will not damage the battery pack.
• The battery pack must be charged prior to the first
start-up (charging time: ► Technical data –
p. 32).
► P. 4, fig. 5
– Press in the locking button (17) and remove the
battery from the device.
► P. 4, fig. 6
– Insert the battery pack into the charger.
– Plug the charger into the power supply.
The charging status is displayed by the control
lights (18).
– Slot the battery pack into the device and make
sure it clicks into place correctly.
Checking the remaining capacity of the battery
– Press the button (16).
The remaining capacity of the battery is displayed by
the control lights (15).
GB
29
Publicité
