Publicité
GB
Device-specific safety instructions
• The product must be standing on an even, hori-
zontal surface with clearance to all sides.
• The product may not be operated outdoors.
• Never put objects through the protective grille into
the product.
• Objects that can be pulled (e. g. curtains, plants),
must not be in the immediate vicinity.
• Never expose the product to water or other liq-
uids.
• The product must not be operated in rooms with
bathtubs, showers or swimming pools or near to
wash basins or water connections.
• Remember that moving parts may also be located
behind ventilation and venting slots.
• If the power cord of this device is damaged, it
must be replaced by the manufacturer, its cus-
tomer service department or a similarly qualified
person, in order to avoid potential hazards.
• Symbols appearing on your device may not be
removed or covered. Signs on the device that are
no longer legible must be replaced immediately.
Read and observe the instructions for use
before using the product for the first time.
Unpacking and assembly
Unpacking
Unpacking the product and checking for complete-
ness.
Scope of delivery
• Pedestal fan
• Instructions for use
Your product at a glance
Note: The actual appearance of your
product may differ from the illustrations.
► Overview – p. 2
1. Logo cover
2. Front grill
3. Blade cap
4. Blade
5. Nut
6. Rear grill
7. Motor
8. Oscillation knob
9. Control box Screw
10. Tube
11. Small plastic base
12. Screws (4 pcs)
13. Cross base (2 pcs)
14. Cross base feet (4 pcs)
15. Grill clip
Assembly
► Overview – p. 2
Fault/malfunction
Product not running.
14
Operation
Check before switching on!
Check the safe condition of the product:
– Check whether there are any visible defects.
– Check whether all parts of the product are firmly
Switching On/Off
► Operation – p. 3
– Plug the power cord into a suitable socket.
– By pushing the fan control switch, and choose the
– When you push and pull the Oscillation Knob you
Cleaning
– Turn off the product, pull out the mains plug.
– Wipe the product with a slightly damp cloth.
Storage and transport
Storing
– Store the device and any accessories in a dry,
– In case of longer periods without operation, pro-
– If the device is not used for an extended period
Transport
– Use the original packaging to ship whenever pos-
Troubleshooting
If something stops working...
Malfunctions are often caused by minor faults. You
can easily remedy most of these yourself. Please
consult the following table before contacting the ven-
dor. You will save yourself a lot of trouble and possibly
money too.
Cause
No mains voltage?
DANGER! Caution, risk of injury! The
product may only be put into operation if
no faults are found during the check-up.
Ensure that any defective parts are
replaced before the product is used again.
attached.
speed levels:
• 0=OFF,
• 1=Low speed,
• 2=Medium speed,
• 3=High speed
can switch the oscillating function ON or OFF.
DANGER! Caution, risk of injury!
Always pull the mains plug out before
commencing any work on the product.
well-ventilated place.
tect the device and its accessories against soiling
and corrosion.
(overwintering), store it in a dry frost-free location.
sible.
DANGER! Risk of injury! Improper
repairs can result in the product function-
ing unsafely. This endangers yourself and
your environment.
Remedy
Check cable, plug, socket and fuse.
Publicité
