Publicité
Assemble
Figure 1.1
Upper quick release plate
Handlebar
Handlebar
groove
Figure 2.1
1. The f irst step: After unpacking the whole
electric bike, unroll the bike (Always wear:
Figure 1.1).
2. The second step:
Figure 2.2
2.1 Put the handlebar into the handlebar
groove, the accelerator on the right,
adjust the handlebar to a comfortable
angle.
2.2 Buckle the upper quick release plate on
the handlebar, and tighten the two
screws with 5MM allen wrench.
10
Publicité
