Publicité
SWIMMING POOL HEAT PUMP TYPE SP
4.5 PV Ready function
The PV Ready icon is displayed on the setting interface.Click to enter the PV control
interface. Wiring diagram, description of mode and parameter setting interface can be
selected.
If the PV Ready function is not available, the PV Ready icon is not
visible.
1
3
4
5
6
2x
• Press 2 times on
to return to the main screen.
WWW.NORSUP.EU
4.6 Mode selection
2
1
2
3
Press 1 times on
to return to the ma in screen.
4.7
Locking and unlocking the touch screen
The screen can be locked or unlocked either in ON or in OFF mode.
5
s
Lock activated
5
s
Lock deactivated
Alterations which serve the technological progress as well as errors excepted!
SWIMMING POOL HEAT PUMP TYPE SP
4.8
SILENT function settings
Silence mode enables the heat pump to be used in economic and very silent
mode when the heating needs are low (maintaining the pool temperature or
need for ultra-silent operation).
This function can be Activated/Deactivated manually or using a Timer.
Activation/Deactivation
1
4
5
1x
3
Silent mode activated
Press 1 times on
to return to the main screen.
Adjusting the SILENT mode Timer
1
3
Alterations which serve the technological progress as well as errors excepted!
Temperature curve automatically updates every one hour,
6
2
Silent mode deactivated
Press 2 times on
to return to the main screen.
The setting step is "hour to hour".
Once the Timer is activated, it is active 7 days a week.
4.9
Troubleshooting guide
4
1x
Certain operations must be carried out by an authorized technician.
If a fault occurs on the heat pump
screen.
Refer to following table.
2
Error codes
5
4
When the problem is resolved, the error is automatically acknowledged
and the triangle disappears.
To
delete the error list, press on
4.OPERATION AND USE
Press 2 times on
to return to the main screen.
EN
DE
8
EN
NL
7
DE
FR
9
DA
10
2x
SV
the
appears in the top left-hand corner of
Description
Date and time
of appearance
.
ORIGINAL MANUAL NORSUP
Publicité
