Télécharger Imprimer la page

POWER SMITH PWL50R10H Manuel D'utilisation page 4

Lampe de traval hybride a del de 5000 lumens

Publicité

OPERATION
press it a second time to lower the brightness to 500
lumens, and press it the third time to turn off the DC light.
BatteRY poWeR inDicatoR
The light features a battery power indicator (5) consisting of
three lights: Red, Yellow, and Green.
When the light is connected to AC power:
• Flashing Light (any) - The battery is in charging mode.
• All three lights On - The battery is fully charged.
When the light is NOT connected to AC power:
• Power on the DC light to indicate battery power level,
with more illuminated lights indicating more battery
power remaining.
aDJusting tHe LigHt DiRection
Your work light can be tilted vertically from 20° down to
90° up.
to adjust the light direction, loosen the side locking knobs
(3). Position the work light head to desired angle, then
tighten the knobs to secure it in place.
MAINTENANCE
WARNING:
unplugged and completely cool before attempting to
clean it.
Your light requires very little care and maintenance. Simply
clean the lens regularly with a non-abrasive cleaner.
Always make sure the light is
English
This product is warranted free from defects in material and
workmanship for 5 (Five) years after date of purchase. This
limited warranty does not cover normal wear and tear or
damage from neglect or accident. The original purchaser is
covered by this warranty and it is not transferable. Prior to
returning your product to store location of purchase, please
call the Toll-Free Help Line for possible solutions.
For questions about this or any other PowerSmith™
product,
Please call Toll-Free: 888-552-8665.
Or visit our website:
www.powersmithproducts.com
4
WARRANTY
HELP LINE

Publicité

loading