Publicité
SWIMMING POOL HEAT PUMP TYPE PX
12
WWW.NORSUP.EU
Alterations which serve the technological progress as well as errors excepted!
SWIMMING POOL HEAT PUMP TYPE PX
3.
INSTALLATION AND CONNECTION
3.INSTALLATION AND CONNECTION
3.1
INSTALLATION ILLUSTRATION
3.1 Installation illustration
Chlorinator cell
Water inlet Sand filter
(or other type filter)
Installation items
The factory only provides the main unit and the water
unit; the other items in the illustration are necessary
spare parts for the water system, that provided by
users or the installer.
Installation items:
ATTENTION
The factory only provides the main unit and the water unit; the other items in the illustration are
necessary spare parts for the water system ,that provided by users or the installer.
Please follow these steps when using
for the first time
Attention:
1.
Open valve and charge water.
2.
Make sure that the pump and the water-in
Please follow these steps when using for the first time
pipe have been filled with water.
3.
Close the valve and start the unit.
1.Open valve and charge water.
2.Make sure that the pump and the water-in pipe have been filled with water.
Attention
3.Close the valve and start the unit.
It is necessary that the water-in pipe is higher
ATTN: It is necessary that the water-in pipe is higher than the pool surface.
than the pool surface.
The schematic diagram is for reference only. Please check the water inlet/outlet label on the
The schematic diagram is for reference only. Please
heat pump while plumbing installation.
check the water inlet/outlet label on the heat pump
while plumbing installation.
The schematic diagram is for reference only. Please check the water inlet/outlet label on the
The controller is mounted on the wall.
heat pump while plumbing installation.
The controller is mounted on the wall
Alterations which serve the technological progress as well as errors excepted!
Valve
Water outlet
Water
supply
Pool
Water pump
ORIGINAL MANUAL NORSUP
13
EN
DE
EN
NL
DE
FR
DA
SV
Publicité
