Publicité
SWIMMING POOL HEAT PUMP TYPE PX
Click "Parameter setting" interface displays as follows:
4.5.2 Spot Time Setting interface
Click the spot time button
WWW.NORSUP.EU
24
, the interface displays as follows:
Alterations which serve the technological progress as well as errors excepted!
SWIMMING POOL HEAT PUMP TYPE PX
NO.
Name
Timer switch function on
Week setting
Time period setting
Turn page
Parameter setting
4.5.5 History of the fault
In the main interface, click fault display button, interface displays as follows:
The fault
Fault code
name
If no fault, the main interface displays static "
When fault occurs, the fault icon will flash between the "
fault interface will record time, code, name of the fault.
After troubleshooting, if you do not check the fault record, the main interface
will display static "
"; If you check the failure record, the main interface will
displays static "
"; Fault record is in reverse order, according to the happening
time.
Press the "Clean" button, you can delete the fault record.
Alterations which serve the technological progress as well as errors excepted!
Button function
Clicking the button, when the front color is green, the
timer switch is on
Set the day of the week to activate the timer switch
Set the time to turn on and the time to turn off
A total of 6 timer switch time periods can be set,
which can be selected by turning the page
Set the mode, target temperature and max frequency
for this period time
Fault time
day - month - year
hour:min
";
" "
", the
ORIGINAL MANUAL NORSUP
EN
DE
EN
NL
DE
FR
DA
SV
25
Publicité
