Publicité
Display
When powering on for the first time, the display will be complete for 3 seconds, while the start up
bell will ring, and then the display will enter normal operation;(The initial power-on, the gear of
freezer compartment and fridge compartment set at ).
Fault indication
The following warnings appearing on the display indicate corresponding faults of the refrigerator.
Though the refrigerator may still have a freezing function with the following faults, the user shall
contact maintenance specialist for maintenance, so as to ensure normal use of the refrigerator.
Temperature setting
Click the setting button A to set the fridge compartment.
Click the setting button B, the indicators
light up to set the freezer compartment.
The refrigerator will operate according to the new set gear in 15 seconds.
Tips:
The lower the set temperature, the longer you can safely store your food and the more electricity
the refrigerator consumes.
The higher the set temperature, the quicker your stored food decays and the less electricity the
refrigerator consumes.
Super cool mode :
Click the setting button A until the icon
lighten, and the fridge compartment enters super cool
mode in 15 seconds.
The fridge compartment will automatically exit super cool mode after 6 hours or press the
temperature setting button A to exit Super cool mode earlier.
Super freeze mode
•Click the setting button B, the indicators
light up, and click the setting button B again until the
icon
lighten, and the freezer compartment enters Super freeze mode in 15 seconds.
•The freezer compartment will automatically exit super freeze mode after 40 hours or press the
setting button B to exit super freeze mode earlier.
•It is suggested to turn on super freeze mode for 12 hours before placing large amount of frozen
food in freezer compartment at one time.
Publicité
