Publicité
1
Inserting the batteries into the remote
The remote may have a screw that secures the battery compartment cover
onto the remote control (or this may be in a separate bag). Remove the screw,
if the cover is screwed on previously. Then remove the battery compartment
cover to reveal the battery compartment. Insert two 1.5V - size AAA batteries.
Make sure the (+) and (-) signs match (observing correct polarity). Do not mix
old and new batteries. Replace only with same or equivalent type. Place the
cover back on. Secure the cover again with the screw, if any.
2
Connections
Antenna
Connect the antenna cable/s to your TV.
rear-left side of the TV
HDMI connection
rear-left side of TV
Power
After unpacking, allow the TV set to reach the ambient room temperature before you connect
the set to the mains. Plug one end (the two-hole plug) of the supplied detachable power cord
into the power cord inlet on the rear side of the TV. Then plug the other end of the power
cord into the mains socket outlet.
IMPORTANT: The TV set is designed to operate on a 220-240V AC, 50 Hz supply.
3
Switching on the TV
In order to turn the TV on from standby mode:
• Press the Standby, Guide, Netflix, or Prime Video
button on the remote control.
• Press the control button on the TV.
satellite
dish
aerial /
cable TV
External Devices
PLEASE ENSURE BOTH UNITS ARE
SWITCHED OFF BEFORE CONNECTING
Use the proper cable to connect two units together.
To select the desired input source, press the Source
button on the remote control. Or press the control
button to display the function options menu, the focus
will be on the current input source option. Scroll through
the available sources by pressing the button. TV will
automatically switch to the highlighted source.
English - 1 -
Publicité
