Publicité
eng
Product Information
This crib has been designed and tested to
ensure compliance with the latest relevant safety
standards.
• Newborn to school-age convertibility – from
crib to toddler bed
• Folding design for easy storage – no small
parts to lose
• 2 different mattress platform heights for easy
access to newborn baby
• Contemporary design
• 4 lockable castors included
Model No.: 10385
Patents Pending
Colour & contents may vary
NOTE: Adult assembly required.
If refinishing, use a nontoxic finish specified for
children's products.
10
Instructions For Safe Use – Please read
carefully and keep for future reference
The correct use and maintenance of your baby
crib bed will ensure it gives long and trouble-
free use. When somebody else is using your
crib bed please ensure they also know how to
use it, how to adjust it and the necessary safety
precautions. The safety of your child is your
responsibility.
Select base board level
The base board can be set at different heights.
UPPER position should ONLY be used for babies
from new born to approximately 6 months old or
until can sit up unaided.
WARNING
TO PREVENT FALLS, THE MATTRESS BASE OF THIS
Crib SHOULD BE ADJUSTED TO THE LOWEST
POSITION BEFORE THE CHILD CAN SIT UP.
1
-
10
Crib Set Up
– (#02 side panels, #04a & b side stays, #07
tool - hex key, #08 bolts) assemble the 4 side
stays onto the upper level of the side panels
by tightening the bolt using the tool included
(hex key). You will find the hex key enclosed
with the castors. (refer to illustration 1 & 2)
– (#01 end panel, #02 side panels, #07 tool –
hex key, #08 bolts) Join two side panels to
one of the end panel by tightening the bolts
with tool included (hex key). Make sure the
sides with stays assembled faces to the inside
Publicité
