Publicité
GENERAL WARNINGS
Read the warnings contained in this document carefully as they provide important information regarding safe ins-
tallation, use and maintenance.
• The device must be used only for the use for which it was expressly designed.
• Any other use is to be considered improper. The manufacturer cannot be held responsible for any damage
resulting from improper and unreasonable use.
• The execution of the system must comply with current regulations. All the devices making up the system must
be intended exclusively for the use for which they were designed.
• Provide a suitable isolation and protection switch upstream of the devices with a contact opening distance of
at least 3mm.
• Before connecting the equipment, make sure that the plate data corresponds to that of the distribution network.
• After removing them from the packaging, check the integrity of the equipment. Packaging elements (plastic
bags, expanded polystyrene, etc.) must not be left within the reach of children, as they are potential sources
of danger.
• Do not block the ventilation or heat exhaust openings or slots.
• Do not install the equipment in environments exposed to rain or humidity. In these cases, use special containers.
• Before carrying out any cleaning or maintenance operation, disconnect the device from the electrical power
supply by turning off the system switch.
• In the event of a fault and/or malfunction of the device, turn off the power using the main switch and do not
tamper with it.
• In the event of infiltration of liquids or objects inside the device and for any repairs, we recommend contacting
the technical assistance center indicated by the manufacturer.
• Do not use extension cables for the power supply cable.
• The installer must ensure that user information is present on all installed devices, including this document.
• Failure to comply with the above may compromise the safety of the appliance.
CLEANING OF PARTS
Use a soft cloth to remove dust and dirt. Do not use aggressive cleaning liquids (petrol, solvents, etc.) which could
cause corrosion. Do not use spray cleaning products.
DIRECTIVE 2012/19/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 4 July 2012 on waste
electrical and electronic equipment (WEEE)
The symbol of the crossed-out wheeled bin on the product or on its packaging indicates that this
product must not be disposed of with your other household waste.
Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated
collection point for the recycling of waste electrical and electronic equipment.
The separate collection and recycling of your waste equipment at the time of disposal will help to
conserve natural resources and ensure that it is recycled in a manner that protects human health and
the environment.
For more information about where you can drop off your waste equipment for recycling, please contact your local
city office, your household waste disposal service or the shop where you purchased the product.
DS1088-019
5
Publicité
