Publicité
ENGLISH
INDEX
OVERVIEW
..................................................................................................................................................... 4
INSTALLATION ..................................................................................................................................................... 4
START UP
..................................................................................................................................................... 4
GENERAL WARNINGS ............................................................................................................................................ 5
Cleaning of the parts ......................................................................................................................................... 5
OVERVIEW
The 2 smart reader door expansion card has been designed to be plugged on a 2smart reader controller to
increase the capacity to 6 doors.
Features
Powered through the controller, doesn't require any extra psu.
- Two doors
- 1 reader (12Vdc +/- 15% 80mA per reader)
- 1 RTE (request to exit)
- 1 door contact with end of line management
- 1 relay 48V 2A
Dimensions: ..................................................................................................................210 mm x 70 mm x 30 mm
Operating temp: ................................................................................................................................ -20°C to 50°C
Humidity: ............................................................................................................................................ 85% RH max
Stockage: ........................................................................................................................................ -20°C to +70°C
INSTALLATION
Warning : Turn off the power supply before adding this expansion to the controller.
Carefully plug the expansion to the controller. The terminals have to match between both devices. Then use both
provided screws to fix the expansion to the controller.
Wiring diagram
See the full installation guide (provided with the controllers).
START UP
To be managed, the input/output expansion card must be declared in the software Ipassan Manager.
See Ipassan manager software user guide.
4
DS1088-019
Publicité
