Publicité
5. If the power cord or power plug is damaged, stop using the
appliance immediately, to avoid re, electric shock or other
injuries.
Content that means [note]
1. Be very careful when moving or installing the appliance to
avoid damage to the appliance or damage to the cupboards.
2. Before starting up the appliance, remove all packaging
materials and accessories from the cavity.
3. The power socket shall be accessible to users (such as next to
GB
the cupboard) for easy power-o .
4. After installation is complete, make sure that the power plug is
rmly inserted into the socket.
5. Please refer to the "Cupboard Diagram" for the requirements of
net depth of the cupboard.
The clearance between the cupboard bottom board and the
rear board (or wall) shall not be less than 50 mm.
Installation steps
1. Please customize the cupboard according to the "Cupboard
Diagram".
2. Before installation, please check for normal power socket and
appropriate grounding, and check whether the cupboard
dimension meets the installation requirements.
3. Place the appliance in designated locations in the kitchen,
install it in a vertical cupboard, and connect the power supply.
22
Publicité
