Publicité
1. Reserve 5 mm for the door panel at the top and bottom
respectively.
2. Reserve 20 mm for the door panel on the left and right
respectively.
3. Reserve 20 mm for the door panel in thickness.
If the appliance is installed under the hob, the minimum thickness
of worktop A is shown below:
GB
Hob type
Induction hob
Full-surface induction
Gas hob
Electric hob
1. The thickness of the cupboard board is 20 mm.
2. If the power socket is installed on the back of the appliance, the
depth of the cupboard opening shall be increased from a
minimum of 590 mm to 620 mm.
3. The dimensions in the gures are in mm.
20
worktop A
37 mm
47 mm
30 mm
27 mm
Publicité
