Publicité
WARNING
Please observe the following information before using the in-
strument:
Do not operate the instrument in the proximity of electrical
|
welders, induction heaters and other electromagnetic fields.
After an abrupt temperature fluctuation, the instrument
|
should be allowed to adjust to the new temperature for about
30 minutes before using it. This helps to stabilize the IR sen-
sor.
Do not expose the instrument to high temperatures for a long
|
period of time.
Avoid dusty and humid surroundings.
|
Measurement instruments and their accessories are not toys.
|
Children should never be allowed access to them!
In industrial institutions, you must follow the accident preven-
|
tion regulations for electrical facilities and equipment, as es-
tablished by your employer's liability insurance organization.
Please observe the following five safety rules:
1
2
3
4
5
®
Testboy
10
Disconnect.
Ensure that the instrument cannot be turned back on
again.
Ensure isolation from the main supply voltage (check
that there is no voltage on both poles).
Earth and short-circuit.
Cover neighbouring parts that are under live electrical
load.
Notes
13
Publicité
