Publicité
Maintenance
Before cleaning or maintenance operation, switch off and unplug the appliance. Ensure it is
perfectly cooled. To remove the dust, wipe the appliance with a cloth.
Never use abrasives or detergents.
Bulb Replacement
This product does not use a standard bulb for its flame effect. The appliance uses an
electronically controlled LED system to create the effect, therefor no parts need to be
replaced. There are no user serviceable parts on this appliance. Under no circumstances
should the appliance be serviced be anyone other than a qualified electrician.
Troubleshooting
No light from the fuel effect: Possibly a bulb failure. Check the LED system by
qualified electrician.
No heat or light: Check the wall socket by plugging in a known working appliance. If
socket is functional, and cord or plug is suspected, have them checked by an
electrician.
Light but no heat: Check that the Thermostat on the heater is set above the ambient
room temperature. Alternatively, the automatic cut-off may have engaged - see Safety
Cut-Off section.
Disposal
At the end of the product's serviceable life it should be disposed of thoughtfully and safely
in accordance with local authority regulations. The plug should be removed from the power
supply cord and the power cord cut from the heater.
Technical Specification
Supply:120V~ 60Hz
Rated power: 1500W
Lighting: LED bulbs (no replaceable parts)
Meaning of crossed –out wheeled dustbin:
Do not dispose of electrical appliances as unsorted municipal waste, use
separate collection facilities. Contact you local government for information
regarding the collection systems available.
If electrical appliances are disposed of in landfills or dumps, hazardous
substances can leak into the groundwater and get into the food chain,
damaging your health and well-being.
4
Publicité
