Publicité
V1.0
CARE & MAINTENANCE
1.
Maintain the tool with care. A tool in good condition is
efficient, easier to control and will have fewer problems.
2.
Inspect the tool components periodically. Repair or replace
damaged or worn components. Only use identical
replacement parts when servicing.
3.
Follow instructions for lubricating and changing accessories.
4.
Only use accessories intended for use with this tool.
5.
Keep the tool handles clean, dry and free from oil/grease
at all times.
6.
Maintain the tool's labels and name plates. These carry
important information. If unreadable or missing, contact
Princess Auto Ltd. for replacements.
WARNING! Only qualified service personnel should repair the
tool. An improperly repaired tool may present a hazard to the
user and/or others.
HYDRAULIC RAM MAINTENANCE
Monthly maintenance is recommended for the hydraulic ram.
Any restrictions due to dirt, rust, etc. can cause the either slow
movement or extremely rapid jerks, damaging the internal
components. The following steps are designed to keep the pump
maintained and operational.
1.
Lubricate the ram piston rod (#R9).
2.
Visually inspect for cracked welds, bent, loose, missing parts
or hydraulic oil leaks.
3.
Inspect the hydraulic ram immediately if it was subjected to
an abnormal load or shock load.
4.
Remove any hydraulic pump from service that is damaged,
worn down or operates abnormally, until repaired by an
authorized service technician.
5.
Check and maintain the ram's oil level.
Always store your press with the hydraulic ram in the fully
retracted position. This will help protect critical areas from
corrosion. Do not use brake or transmission fluids or regular
Visit www.princessauto.com for more information
20 TON HYDRAULIC SHOP PRESS
8656316
9
Publicité
