Publicité
8656316
4.
Do not attempt makeshift repairs to a hydraulic system. Such
repairs can fail suddenly and create a hazardous condition.
5.
Never exceed the hydraulic system's load capacity
(see Specifications).
6.
Do not adjust the hydraulic system's relief setting.
7.
Hydraulic fluid escaping under pressure has sufficient force to
penetrate your clothing and skin.
7.1 Always check for leaks wearing a face shield and
safety goggles.
7.2 Wear rubberized gloves.
7.3 Wear protective clothes.
7.4 Do not use your hands to detect a hydraulic fluid leak.
Use a large piece of wood, cardboard or paper and
watch for discolouration.
8.
A damaged or disconnected hydraulic hose under pressure
may whip around and inflict personal injury or damage the
work area. Secure the hose to a fixed or permanent structure
with clamps or cable ties.
9.
Change your clothing immediately if sprayed with hydraulic
fluid. Store clothing or rags contaminated with hydraulic fluid
in an approved metal safety can with a spring-closing lid and
venting designed to contain a fire.
10. Do not expose the fluid to an ignition source. Hydraulic fluid
has a combustible flash point of approximately 200°F (93°C).
Consult the material Safety Datasheet (MSDS) for your
hydraulic oil to determine the actual flashpoint.
UNPACKING
WARNING! Do not operate the tool if any part is missing.
Replace the missing part before operating. Failure to do so
could result in a malfunction and personal injury.
Remove the parts and accessories from the packaging and
inspect for damage. Make sure that all items in the parts list
are included.
6
20 TON HYDRAULIC SHOP PRESS
For technical questions call 1-800-665-8685
V1.0
Publicité
