Publicité
6. POWER SUPPLY LINE CONNECTION
Attention: The power supply lines should be connected by authorized technician.
7. HOW TO USE
1. Please put suitable cookware onto the plate of induction cooker, and connect the plug cord correctly. Then
you can adjust the knob to get different power level. please be kindly noted that before the induction cooker
begin to work, the tick mark on the knob should be on the position of ON/OFF
2. When on the state of working, adjust the knob clockwise to increase the power, adjust the knob
counterclockwise to decrease the power. Please be kindly noted that the left knob control the Zone 1 from
800-3500W, the right knob control the Zone 2 from 800-5000W.
3. The zone 2 have the power share function. When the two zone are working at the power of 3500W, the zone
2 can increase the power to 5000W, then the power of zone 1 can decrease to 2000W automatically. If adjust
the power of zone 1 higher than 2000W, for example 3500W, the power of zone 2 will change into 3500W
automatically.
4. If you want to switch off the induction cooker, turn the knob till the induction cooker display "----", after 3
seconds, the induction cooker will switch off. After stopping working, the fan will cool down the induction
cooker for one minute, and then will be off.
5. The induction cooker will shut off automatically if there is no any operation within 4 hours
www.combisteel.com
Zone 1
Zone 2
5
Publicité
