Publicité
B
If the power supply to the hob is cut off while the residual heat indicator light is on, the warning
light will flash when the power is restored. The display flashes until the residual heat has
dropped or one of the cooking zones is activated.
Tips and advice
IMPORTANT
When the heating elements are set to the highest levels,
the hot zones may switch on and off. This is because of a
safety system that prevents the glass from overheating.
This is normal at high temperatures, will not damage the
hob and only extend cooking times very slightly.
WARNING
• Never use the hob without any cookware on the cooking
zone.
• Only use flat-bottomed pans with a thick base.
• Check that the bottom of the cookware is completely dry
before placing it on the hob.
• When the cooking zone is on, it is important to check that
the cookware is centred on the zone.
• To save energy, do not use cookware with a different
diameter from that of the cooking zone used.
Using the appliance
11
EN
Publicité
