Publicité
Instructions external staircase Scarvo
5) Assembly
Step 16
Now fasten the handrail. First, drill a Ø5 mm hole in the end pipe and
cut a thread there using the supplied screw tap (26) (fig. 1). Insert the
hexagon screw (30) through the universal connection (15) and screw it
into the pre-cut thread (fig. 2).
Drill a 4 mm hole through the handrail (14) and universal connection
(15) and screw them together using the supplied pan head screw (12).
1
(26)
Please make sure that the platform handrail (14) is attached to the
adjacent wall or railing. Please check all screw connections on the
stairs and tighten if needed.
2
(14)
-39-
Publicité
