Publicité
Instructions external staircase Scarvo
5) Assembly
Step 6
The individual step distances then have to be marked and the steps
aligned. Orientation lines make it easier to align the steps at a later
point. The step distance can be easily calculated: Story height H / (11
steps + 1 platform). Fastening a tape measure to the support pipe
makes this much easier (fig. 1). Start with the first step from the top.
Let the steps to overlap by 2 cm at the end of the step. Fasten the
steps with the grub screws (5) (fig. 2). Do this for all steps.
1
Step 7
Now first insert the rear railing rods (3) into the railing holders at the
end of the step (fig. 1). First fasten the rods with the grub screws (13)
(fig. 2). The curve of the rods points in the opposite direction (seen
from bottom to top).
1
(3)
2
(5)
2
-32-
Publicité
