Publicité
Instructions external staircase Scarvo
5) Assembly
Now align the tabs parallel to the handrail by turning the ball into the
rod. The angle of the tab can be changed by turning the rod (fig. 3).
Important: Check of the rods are vertical using a spirit level (fig. 4).
3
When these are aligned, screw the bracket to the railing rod using the
flathead screw (12).
In the next step, mark the holes with a pencil and drill them into the
handrail using the supplied Ø4 mm (28) drill bit. Then take the
countersunk screws (20) and screw the handrail holder to the handrail
pipe (Fig. 5).
5
(20)
4
-34-
Publicité
