Publicité
42
Listing Label
CONTACT LOCAL BUILDING OR FIRE OFFICIALS ABOUT INSTALLATION AND RESTRICTIONS IN YOUR AREA.
SUITABLE FOR USE IN CONVENTIONAL RESIDENTIAL INSTALLATIONS, MANUFACTURED HOMES AND ALCOVES.
Report No. 100517863-001
Control No. 4000515
PREVENT HOUSE FIRES - Install and use only in accordance with the manufacturer's installation and operating instructions. Contact your local
building or fire officials about restrictions and installation inspection in your area. Refer to local building codes and manufacturer's instructions
for precautions required for passing a chimney through a combustible wall or ceiling. Do not run a chimney connector through a combustible wall
or ceiling. Do not connect this unit to a chimney flue serving another appliance. Clearances may be reduced by methods specified in NFPA 211,
listed wall shields, pipe shields, or other means approved by local building or fire officials.
This wood heater contains a catalytic combustor, which needs periodic inspection and replacement for proper operation. Consult owner's manual
for further information. It is against the law to operate this wood heater in a manner inconsistent with operating instructions in the owner's
manual, or if the catalytic element is deactivated or removed. CAUTION: the combustor used in this appliance (part no. 174-01111) is fragile and
must be handled carefully. Burning of metal foils, plastic, garbage, sulphur and diesel oil will render the catalyst in the combustor inactive. The
performance and durability of the catalytic combustor has not been evaluated as part of the certification.
STANDARD RESIDENTIAL FREESTANDING INSTALLATIONS REQUIRE: 6" diameter, minimum 24 MSG black, with listed UL-103 HT factory-built chimney, suitable for
use with solid fuels or masonry chimney. Pedestal or legs are required.
ALCOVE INSTALLATIONS REQUIRE: One of the Listed doublewall connectors listed below.
MANUFACTURED HOME AND REDUCED CLEARANCE INSTALLATIONS REQUIRE: One of the Listed doublewall connectors listed below. In addition, manufactured
home installations require outside air - use the optional pedestal or outside air boot.
AMERI-TEC model DCC connector with model HS chimney
DURA-VENT model DVL connector with DURA-PLUS chimney
GSW-JAKES EVANS SUPERPIPE 2100
I.C.C. EXCEL (103-HT) chimney with HP connector
Minimum Clearances
To Combustibles And
Hearth Requirements:
FREESTANDING CLEARANCE DIAGRAM
BACKWALL
E
B
D
STOVE
A
Electrical Rating:
115V., 60 Hz, 1.8 Amps
Optional Blower:
# 99000139
Do not route power cord under or in front of appliance.
Replace glass only with 5mm neoceramic or
ceramic glass.
Must be installed with legs provided.
Made in U.S.A.
© Travis Industries
Listing Label
DO NOT REMOVE THIS LABEL
CONFORMS TO UL STD 1482; CERTIFIED TO ULC STD S627-2000
FREESTANDING INSTALLATION
Conventional Residential
A.
B.
C.
D.
E.
F.
G.
US: 6 in. (153 mm) / CAN: 8 in. (204 mm)
H.
US: 16 in. (407 mm) / CAN: 18 in. (458 mm)
ADJACENT WALL
Max. Alcove Depth:
F
45
Min. Alcove Height:
Min. Alcove Width:
C
U.S. ENVIRONMENTAL PROTECTION AGENCY
Certified to comply with July 1990 particulate emission standards.
2012
2013
2014
2015
Jan
Feb
MODEL:
CAPE COD
Certified for USA and Canada
METALFAB model DW connector with TG chimney
OLIVER MACLEOD PROVENT model PV connector with model 3103 chimney
SECURITY model DP connector with SECURITY model ASHT or S2100 chimney
SELKIRK METALBESTOS model DS connector with model SSII chimney
®
OLYMPIA VENTIS
with Ventis doublewall black stove pipe
Singlewall Connector
Installations
12.75 in. / 324 mm
14.75 in. / 375 mm
7.25 in. / 185 mm
26 in. / 661 mm
15 in. / 381 mm
17.5 in. / 445 mm
ALCOVE SPECIFICATIONS
48 in. (1220 mm)
84 in. (2134 mm)
59 in. (1499 mm)
DATE OF MANUFACTURE
Mar
Apr
May
Jun
Jul
Aug
100-01282
SERIAL NO:
Alcove, Manufactured Home and Reduced
Clearance Conventional Residential
Installations
12.75 in. / 324 mm
11.75 in. / 299 mm
7.25 in. / 185 mm
26 in. / 661 mm
12 in. / 305 mm
17 in. / 432 mm
US: 6 in. (153 mm) / CAN: 8 in. (204 mm)
US: 16 in. (407 mm) / CAN: 18 in. (458 mm)
FLOOR PROTECTION DIAGRAM
Floor protection must be a non-combustible
FLOOR PROTECTOR
material extending beneath the heater and to
G
the front, sides and back as indicated. See
G
G
Owner's Manual for examples of non-com-
STOVE
bustible materials that can be used.
H
Do not obstruct space beneath heater.
FRONT
Manufactured by:
TRAVIS INDUSTRIES, INC.
4800 Harbour Pointe Blvd. SW
Mukilteo, WA 98275
www.travisproducts.com
Sep
Oct
Nov
Dec
1018
4150526
Publicité
