Publicité
1. Fill the kettle up to "max" with a mixture of one part ordinary
vinegar and two parts water. Switch on and wait for the appliance
to switch off automatically.
2. Let the mixture remain inside the kettle overnight.
3. Discard the mixture the next morning.
4. Fill the kettle with clean water up to "max" mark and boil again.
5. Discard the boiled water to remove any remaining scale and
vinegar.
Rinse the inside of the kettle with clean water.
REPAIR AND MAINTENANCE:
This appliance does not contain any user serviceable parts. Do not try to repair the appliance
yourself. Always bring it to qualified technician.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
STORAGE AND TRANSPORTATION:
1.
Clean the appliance as described and let it dry completely. We recommend storing the
appliance in its original package.
2.
Always store the appliance in a dry-well ventilated place out of reach of children.
3.
Always carry the appliance by its handle.
4.
Protect the appliance against vibration and shocks when transporting
IMPORTANT SAFEGUARDS:
•
DO NOT PLACE ON OR NEAR A HOT GAS OR ELECTRIC BURNER OR IN A HEATED OVEN.
•
DO NOT OPERATE THE APPLIANCE WITHOUT ANYTHING IN IT TO AVOID DAMAGING THE
HEAT ELEMENTS.
•
WHILE WATER IS BOILING, OR JUST AFTER THE WATER HAS BEEN BOILED, AVOID CONTACT
WITH STEAM FROM THE SPOUT.
•
ALWAYS TAKE CARE TO POUR BOILING WATER SLOWLY AND CAREFULLY.
•
BE CAREFUL OF REFILLING WHEN THE KETTLE IS HOT. BETTER TO FILL THE KETTLE WHEN IT IS
COOL.
•
DO NOT TOUCH THE HOT SURFACE. USE THE HANDLE OR THE BUTTON.
•
THE KETTLE CAN ONLY USE WITH THE BASE PROVIDED.
•
THE ATTACHED BASE CANNOT BE USED FOR OTHER THAN INTENDED USE
•
EXTREME CAUTION MUST BE USED WHEN MOVING AN APPLIANCE CONTAINING HOT
WATER.
•
ALWAYS ENSURE THE LID IS CLOSED AND DO NOT LIFT IT WHILE THE WATER IS BOILING.
SCALDING MAY OCCUR IF THE LID IS REMOVED/OPENED DURING THE BOILING.
•
IF THE KETTLE IS OVERFILLED, BOILING WATER MAY SPILL OUT.
•
AVOID SPILLAGE ON THE CONNECTOR.
•
THE HEATING ELEMENT SURFACE IS SUBJECT TO RESIDUAL HEAT AFTER USE.
WARNINGS AND SAFETY INSTRUCTIONS:
WHEN USING ELECTRICAL APPLIANCES, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE
FOLLOWED:
•
READ ALL INSTRUCTIONS BEFORE USE.
Publicité
