Publicité
GB
– Connect the power cable. A buzzer sounds and all
LEDs and the display flash for 1 second. The display
(5) shows "L" and the device is ready for operation.
Note: The child safety lock is activated
when the display shows "L". All button
except the Unlock buttons and the Power
on/off button[ ] (8) are deactivated.
– Press the [−] (4) and [+] (6) buttons simultane-
ously for 2 seconds in order to deactivate or acti-
vate the child safety lock.
• You can activate the child safety lock while cook-
ing. The device retains the configured settings.
– Press the on-off button [ ] (8). The device is now
in standby mode.
– Press the button[
ing time with the buttons [−] (4) and [+] (6).
– Press the buttons briefly to set the cooking time in
intervals of minutes. Keep the buttons pressed for
at least 3 seconds in order to set the cooking time
to 10-minute intervals.
– After 5 seconds, the set time is adopted and the
device starts the cooking process.
– After the time has elapsed, the device switches off
automatically and returns to the standby mode.
– Press the [
] (2) button while cooking to view the
remaining time.
– Press the [−] (4) or [+] (6) buttons to change the
remaining time.
– Keep the [
] (2) button pressed for 3 seconds to
delete the set cooking time.
– Press the [°C] button (3) and set the desired
cooking temperature with the [−] (4) and [+] (6)
buttons.
– Press the button [
power level with the buttons [−] (4) and [+] (6).
– The device switches off automatically after two
hours if the set cooking time is not longer than
that.
– The fan continues to work for 1 minute after the
cooking is complete in order to dissipate the heat.
Error/Fault
Device does not work.
Error code
E0
E1
E2
E3/E4
24
] (2) and set the desired cook-
] (7) and set the desired
Cause
Device is faulty?
No power supply?
Is the On/Off switch set to[0]?
Cause
Without cookware or Incompatible
cookware used
IGBT sensor open circuit/short circuit Contact the supplier.
Internal overheat
Voltage > 270 V, Voltage < 90 V
Information on energy consumption
The energy consumption of the appliance was calcu-
lated in accordance with EN 60350-2 and EN 50564.
– Keep the power consumption to a minimum.
– Only adjust the power to high as necessary.
Cleaning and maintenance
DANGER! Risk of injury! Before carry-
ing out any work, make sure the device is
unplugged and has cooled down fully.
Cleaning
NOTICE! Risk of damage to the
device! Do not use abrasive or sharp
objects or aggressive cleaning agents.
Do not use solvents.
Do not clean with oven or grill spray.
NOTICE! Risk of damage to the
device! The parts of the device are not
suitable for the dishwasher.
– Wipe down the device with a dry or lightly mois-
tened cloth.
– Carefully clean the ventilation slots from dust and
dirt at regular intervals using a suitable, soft
brush.
Troubleshooting
What to do when something doesn't work...
DANGER! Risk of injury! Unprofes-
sional repairs may mean that your device
will no longer operate safely. This endan-
gers you and your environment.
In many cases, small defects can lead to a malfunc-
tion. You will usually be able to deal with these your-
self. Please consult the following table before con-
tacting the store department. This may save you a lot
of effort and quite often money.
Remedies
Contact the supplier.
Check the cable, plug, and the fuse.
Turn on the device.
Remedies
Use only cookware suitable for in-
duction with a diameter of 12-26 cm.
Place the cookware in the center of
the hotplate.
Check whether the air outlet is
blocked and whether the machine
goes back to the normal state after
cooling down. If the device is still not
working properly, contact your deal-
er.
Check whether the device is con-
nected to a properly installed power
socket.
Publicité
