How To Adjust The Pre-Set Time/Temperature Program To Suit Personal Needs - Weinmann & Schanz E200 Manuel D'utilisation Et D'installation

8. How to adjust the pre-set time/temperature program to suit personal needs

Select the day function
Select the day
Set the times for this day
Select the event (1...6)
Set the time
Select the temperature
Set the temperature
The > button must be pressed to accept a setting.
If you wish to change other events or days, repeat the actions described above.
To return to the auto mode, press the < button.
Note: The last event of the current day can be extended up to the first event of the following day.
If operating mode „7 days" is chosen (see installer options, option 1), the days can be selected as
blocks or individual days (Fig. 5 to 8).
The blocks are selected by repeatedly pressing the > button.
Note: To facilitate programming, blocks of days with the same times/temperatures can be formed
before starting.
40
by pressing the > button up to position „Day"
by pressing the + / – button
by pressing the > button
by pressing the + / – button
by pressing the > button
by pressing the + / – button