BoomToneDJ Maxi Spot 30 Mode D'emploi page 15

automatic, sound activated, synchronized light show. This function is good when you
want an instant show. The first fixture it's DMX input cable will have nothing connect
it, and the other fixtures will be set in slave mode automatically. Their DMX input
cables connect the last fixture DMX output cable (daisy chain). Any fixture can act as
a Master or as a Slave
DMX Controller
The fixture can be set the DMX address remotely by universal DMX controller. First,
you need to programming two scenes into a chase, and then link the fixtures to the
universal DMX controller. When you run the chase, all the fixtures of the chain will be
set the series DMX address automatically. The fixture uses four channels. Please refer
to the following diagram to set the address for the first four units.

10 channels DMX protocol :
Channel Features
1 Horizontal
operation
2 Vertical
operation
3
color
0-139
140-255
4
Gobo
0-63
64-127
128-255
5
strobe
6
Dimming
7 Motor speed
8 Automatic
mode
9 Reset
Instructions
0-255
0-255
Color selection
Automatic color change from slow to fast
Fixed gobo
Shaking gobo
Automatic change pattern from slow to fast
0-255
0-255
0-255
0-255 Adjust forward rotation upwards and downward
rotation backwards
250-255（5 seconds）
15