Bigben RCUBE Mode D'emploi page 22

- When the alarm is activated, the device plays the tune for up to 30 minutes, unless the
user deactivates the alarm.
- W hen the alarm is active, the alarm sound begins softly and increases for 10 seconds to the
same volume you selected in listen mode.
The screen displays the alarm icons for 3 seconds each time the alarm is turned on or off, as
follows:
When changing the alarm status, the alarm icons are displayed for
3 seconds.
Alarm 1
ON
Listen to the built-in tune
- Press the < Note
Long-press to stop the tune. There are 3 tunes in all.
- Press the < Increase
- W hen you select a tune, the tune icon is displayed, then the time reappears after 3 seconds.
The operating status appears for 3 seconds as in the table below:
Tune 1 Tune 2
Varying the brightness / Using the alarm standby
- Press <
"Maximum" >> "Low" >> "Off"
Alarm 2
ON
> button to play the first tune. Press again to move on to the next tune.
> and < Decrease
Tune 3 Volume
20%
> on the device
Alarm 1 or 2 OFF
> buttons to adjust the sound volume.
Volume Volume
40%
to set
- EN 22 -
If the alarm is active,
the alarm status icon
is displayed in the
lower right corner.
Volume
60% 80%
the screen brightness
Volume
100%
to