Alcad ALC-030 Manuel D'installation page 14

VÍDEOPORTERO 2 HILOS KIT - 2-WIRE KIT VIDEODOOR ENTRY SYSTEMS - VIDÉOPORTIER 2 FILS KIT
2
Bracket can also be fixed to an
electrical box.
Fixing points
MONITOR - MONITEUR - MONITOR
1
Connect the monitor connector to
the connection bracket.
3
Make the electrical connections.
consult wired diagrams.
2
Starting from the position shown in
the illustration (i.e. with the upper
part of the monitor approximately
20mm above the connections
bracket), move the monitor closer to
the connections bracket in such a
way that the upper fixing tongues
of the bracket clip into the guides in
the base of the monitor (1).