Alcad ALC-030 Manuel D'installation page 12

VÍDEOPORTERO 2 HILOS KIT - 2-WIRE KIT VIDEODOOR ENTRY SYSTEMS - VIDÉOPORTIER 2 FILS KIT
ALIMENTADOR - POWER SUPPLY - ALIMENTATION
See the safety instructions at the end of this booklet. Protect the power supply unit by complying with existing regulations governing
electrical installations (avoid high-temperature locations and strong magnetic fields, ensure correct fusing, etc.).
1
Mounting on a DIN rail.
4
Connect up the power supply with the elements
that make up the door entry system as shown in
the wired diagrams.
2
If you need to dismount the power supply unit from
a DIN rail, lightly press the fixing tab downwards
(1). Separate the lower part of the power supply
unit from the DIN rain (2).