Publicité
34
MICROMIX MX400
MICROMIX MX400
Welcome to Behringer
Thank you for showing your confidence in us by purchasing the
Behringer MicroMIX MX400.
This 4-channel mixer is perfect for anyone wanting to mix 4 line
level signals quickly and without complications. Despite its
compact size, this mixer produces highest signal quality even at
highest levels, in highest signal integrity.
Connectors and Control Elements
(1)
(2)
(4)
MX400 connectors and control elements
(3)
(5)
(1)
Connect the power supply unit to your MX400 using the
12 V connector. Connecting the power supply unit to the
mains automatically switches the MX400 on. To disconnect
the unit from the mains, pull out the main cord plug.
◊ ◊
When installing the product, ensure that the plug is
easily accessible. If mounting in a rack, ensure that
the mains can be easily disconnected by a plug or by
an all-pole disconnect switch on or near the rack.
(2)
Up to four line signal sources can be connected to these
1/4" TS connectors (INPUT).
◊ ◊
In case the volume level of one of the signal sources is
set too high, the input of the corresponding channel
may produce distortion!
(3)
The OUTPUT carries the MIX signal and is on a
1/4" TS connector.
(4)
This ON LED is illuminated as soon as the unit is connected to
the power.
(5)
Using the LEVEL controls you can set the output level of
each channel.
◊ ◊
High volume levels can damage your hearing or your
headphones. Please turn down all volume controls
to zero (all the way to the left) before you power
up the amp. Always make sure you use appropriate
volume levels.
SERIAL NUMBER. The serial number of the MX400 is located
at the bottom.
35
User Manual
Publicité
