Trevi Tab 9 3G V16 Mode D'emploi page 37

If a network that you have connected to previously is found, the tablet will connect to it.
If you don't see your network in the list,you can force the tablet to re-scan.To scan for networks,
tap the Menu key, and then touch Scan.
2. Select an available Wi-Fi network to connect to: In the same Wi-Fi settings menu above,
touch a network in the list. If the network is open,the tablet will prompt you to confirm
connection to the network. Touch Connect to confirm.
If the network is secured (as indicated by a Lock icon),the tablet will prompt you to enter a
password or other credentials. Touch the Wireless password box to show the on-screen
keyboard and then use it to enter the password. Touch Connect to confirm.
When you have successfully connected to a Wi-Fi network, the Notifications bar in the
upper of the screen will show a Wi-Fi signal indicator.
To learn about how to add a Wi-Fi network when it is not in range or when the router is set
to obscure the network name (SSID); or to configure advanced Wi-Fi options, please refer
to the manual.
COMMUNICATION
TELEPHONE
Make calls
1. Tap the icon
2. Enter the number using the dial keypad. To delete a number, press
3. Tap the icon
4. Tap the icon
Note: To enter "+" to make international calls, touch and hold [0 +].
Call the contacts on the Address Book
1. 1. Tap the icon
2. Scroll through the list of contacts or enter the first letter of the contact you want to
call by tapping the icon
3. In the list, tap the contact you want to call and select the number to use, if there are
several numbers associated with the contact.
to launch the phone's interface.
to start the call.
to end the call.
to open the phonebook.
37
TAB 9 3G V16