Publicité
GetActive™ Timer Button
1. Touching the timer button will cause the digital readout to blink. Use the Up button
settings: 00, 10, 15, 30, 45, 60, 75, 90, 105, 120. Use the Down button
60, 45, 30, 15, 10, 00. Touch the timer button again to confirm and start the countdown.
2. When the timer button is touched, the digital readout will display the remaining time. For example, 120, 119, 118,
117......05, 04, 03, 02, 01, 00). If the desk's height is adjusted during the countdown, the readout will show the height and
return to the timer afterwards..
3. When the countdown is finished, the desk will beep 5 times continuously in 3 successions and remain stationary.
to cycle through the timer settings: 120, 105, 90, 75,
15
to cycle through the timer
ODP10557CA REV.4
Publicité
